Results 1 to 8 of 8

Thread: Coil Rod/Bolt/Nut Specifications

  1. #1
    Associate Engineer
    Join Date
    Nov 2017
    Posts
    4

    Coil Rod/Bolt/Nut Specifications

    Hello,

    I need to model a number of rods and fasteners using coil threads. Where can I find the specifications for these?

    I did a search and could not find anything relevant.

    Yes, I'm a newbie...

    Thanks.

  2. #2
    Administrator Kelly Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    1,974
    Do you have a specification? Industry standard ?
    Tell me and I forget. Teach me and I remember. Involve me and I learn.

  3. #3
    Project Engineer
    Join Date
    May 2015
    Posts
    83
    Find a copy of a book titled: "Machinery's Handbook" published by Industrial Press. The engineer guiding your modeling efforts should have specified the thread and should be able to help you find a copy of the book.

    If there is no engineer on the project google "Kansas City skywalk" to see what can go wrong with threaded rods.

  4. #4
    Associate Engineer
    Join Date
    Nov 2017
    Posts
    4
    One of the threads is for a 3/4-4.5 bolt and nut. Thanks for the tip on the book. I was unaware it covered coil threads.

    I am aware of the sidewalk failure. Very sad. Many failures by many hands...

    Anyway, this is for concrete formwork.

    Thank you for the help!

  5. #5
    Associate Engineer
    Join Date
    Nov 2017
    Posts
    4
    I have a copy of the 22nd edition of the handbook, and I was unable to locate the coil thread profile data. Can someone verify that the recent edition contains this information?

  6. #6
    Project Engineer
    Join Date
    May 2015
    Posts
    83
    Look for 'Unified Screw Threads".

  7. #7
    Technical Fellow jboggs's Avatar
    Join Date
    Mar 2011
    Location
    Myrtle Beach, SC
    Posts
    727
    I'm not aware of any standard for so-called coil threads. When you say "coil threads", do you mean as in Helicoil type thread inserts? You can find their information on their website.

  8. #8
    Associate Engineer
    Join Date
    Nov 2017
    Posts
    4
    These are not HeliCoil inserts. There is nothing in the handbook specifying this thread profile under the UNC thread section, at least in the edition I have. Some examples:

    http://www.buildsite.com/pdf/daytonr...ata-B35024.pdf
    http://www.daytonsuperior.com/docs/default-source/tech-data-sheets/b14coilbolts_td.pdf?sfvrsn=10



    Thanks.
    Attached Images Attached Images

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •