Results 1 to 2 of 2

Thread: Design Jig and Fixture

  1. #1
    Associate Engineer
    Join Date
    Jan 2018
    Posts
    1

    Design Jig and Fixture

    I have a thin part to Design. The part is only 0.25 in ch thick and 1 inch length.Theres a slot inside and radius on all four corners. What type of fixture I can use to manufacture such a tiny part.

  2. #2
    Project Engineer
    Join Date
    May 2015
    Posts
    109
    A stamping die? You left out a depth, type of material, production volume and other info that goes into a production decision.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •