Results 1 to 3 of 3

Thread: Limit switch

  1. #1
    Associate Engineer
    Join Date
    Nov 2014
    Location
    PA, USA
    Posts
    5

    Limit switch

    I have a design where I am using a snap action limit switch to de-energizer an electric motor. The issue I'm having is when the limit switch is actuated there is some delay on the motor which causes over travel. This causes the piece hitting the limit switch to twist.

    Is there another type of non contact switch I can use? Very little force is causing the twist in the component.

    Is there anyway to have no delay in limit switch? From actuation to stop there is about 5/8" over travel. The current snap action switch I am using allows for only about 1/4" travel.

    Thanks,
    Mike

  2. #2
    Technical Fellow jboggs's Avatar
    Join Date
    Mar 2011
    Location
    Myrtle Beach, SC
    Posts
    736
    Unless you have a brake on the motor it sounds like your problem isn't with the switch but with the momentum of the motor. Motors don't stop instantaneously. They will coast to a stop after power is removed. Either move the switch to a position which will account for momentum in the system or put a brake on the motor or some other component.

  3. #3
    Administrator Kelly Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    1,998
    Oo... use a static stop feature instead of a limit switch.
    Tell me and I forget. Teach me and I remember. Involve me and I learn.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •