Results 1 to 2 of 2

Thread: Aspen one help

  1. #1
    Associate Engineer
    Join Date
    May 2018
    Posts
    1

    Aspen one help

    I would like to simulate oxgen combustion in gas turbine using Aspen one. What calculation and/or which reactor should I use, because using Rgibbs gives wrong results. For example ( mass flow constant- assumption ) for O2=21% and N2=79% I got only 40 Celsius degree lower temperature than for O2=100%, which is of course absurd. Additionally for higher temperature is smaller efficiency. Any suggestions ?

  2. #2
    Technical Fellow Kelly_Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,611
    Never heard on the software, a simple google search reveals it a specialized application for very vertical **********.

    You should contact the software designers. I doubt there are many users random on any general engineering website.

    Quote Originally Posted by pawel77power View Post
    I would like to simulate oxgen combustion in gas turbine using Aspen one. What calculation and/or which reactor should I use, because using Rgibbs gives wrong results. For example ( mass flow constant- assumption ) for O2=21% and N2=79% I got only 40 Celsius degree lower temperature than for O2=100%, which is of course absurd. Additionally for higher temperature is smaller efficiency. Any suggestions ?
    Tell me and I forget. Teach me and I remember. Involve me and I learn.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •