Results 1 to 4 of 4

Thread: rack & pinion tangential force calculation

  1. #1
    Associate Engineer
    Join Date
    Jun 2018
    Location
    adana
    Posts
    3

    rack & pinion tangential force calculation

    Hello everyone! I am in design team. I need to calculate rack tangential force or pinion torque for autonomous steering system. I know steering wheel diameter, all about pinion, rack and shaft. Can you help me?
    Attached Images Attached Images

  2. #2
    Technical Fellow jboggs's Avatar
    Join Date
    Mar 2011
    Location
    Myrtle Beach, SC
    Posts
    908
    That is a very open question. If you are on a design team, you should at least try to design it yourself first. It sounds like you are asking someone to do it for you. This forum can help you with details but you should identify those details to ask about.

  3. #3
    Associate Engineer
    Join Date
    Jun 2018
    Location
    adana
    Posts
    3
    Thanks for answering. I want some guide to calculate it. Not whole solution. I am trying now but values are very very low. I don't know If I can find motor. (not possible.) For example, F= m* w^2*r. I used it for pinion.

  4. #4
    Associate Engineer
    Join Date
    Jun 2018
    Location
    adana
    Posts
    3
    Is it possible 800 N?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •