Results 1 to 6 of 6

Thread: Shraeder/Presta Cycle Tire Standards

  1. #1

    Shraeder/Presta Cycle Tire Standards

    Hi

    I need details of presta and shraeder valves - for a hobbyist design project (cycle tire inflater).

    Internet searches only provide most basic info - not enough to design a connector from the inflater to valve around.
    I have obtained an old copy of The Tire and Rim Association Year Book but it does not give the required details.

    I am considering obtaining ISO/BS standards but I'm not sure that they would have the info that I require.

    Can anyone help me with where to look/who to contact for such details.

    Thanks in advance.

    Rich

  2. #2
    Principle Engineer Cragyon's Avatar
    Join Date
    Feb 2013
    Location
    Newark, NJ
    Posts
    299
    Buy a Schrader valve - reverse engineer it.. Or, buy a Schrader valve adapter and reverse engineer it.

  3. #3
    Lead Engineer
    Join Date
    Aug 2013
    Location
    Houston TX USA
    Posts
    421
    From your description I am not sure exactly what you are looking for, but the attached Schrader document gives the dimensions for a valve stem internal socket and thread to receive a Schrader valve.

    Valve Core Brochure.pdf

  4. #4
    Thanks for your replies and thanks for the brochure.

    I'm not sure that it contains a cycle Presta Valve.

    I have access to BSI/ISO standards at work and think I have found the documents I need but certainly in the second document below none of the valves are stated as being a Presta cycle tire valve.

    ISO*4570:2002(en)Tyre valve threads


    ISO*9413:2012(en)Tyre valves*— Dimensions and designation.

    I'm finding that in engineering finding pertinent information on standard parts can be quite a challenge.

    Cheers

    Rich

  5. #5
    Banned
    Join Date
    Mar 2018
    Posts
    2
    threads.pdf
    Presta valves are 5V2, check here , may be that's what you need

  6. #6
    Engineer
    Join Date
    Nov 2018
    Location
    Abu Dhabi
    Posts
    28
    but the attached Schrader document gives the dimensions for a valve stem internal socket.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •