Results 1 to 1 of 1

Thread: Help me design a Vacuum Drying system

  1. #1

    Help me design a Vacuum Drying system

    Hello all,

    I've been entrusted a project of developing a Vacuum Drying System for my company. This system will be used for instant drying of automotive parts after washing. Needless to say the parts will be wet and at an elevated temperature (approx 50 degree C). The requirement is to dry the parts in less than 30 seconds.

    How do I go about this? What will be the type of vacuum pump required? And what are the other parts of a Vacuum Drying system?

    The parts loaded in the machine shall be sealed in a chamber (size approx 300mm x 300mm x 300mm) with a Pneumatic cylinder applying force from the top.

    For reference -

    Any help will be appreciated. Thanks
    Last edited by supersonics29; 12-20-2018 at 07:07 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts