Results 1 to 4 of 4

Thread: The flow measured by the electromagnetic flowmeter is not accurate. How to debug?

  1. #1
    Banned
    Join Date
    Dec 2018
    Posts
    2

    The flow measured by the electromagnetic flowmeter is not accurate. How to debug?

    1. Check if the fluid is filled with the sensor measuring tube
    2. Is the information line connection normal?
    3. Check the sensor coefficient, whether the sensor zero point is set according to the sensor label or the factory check list.

  2. #2
    Administrator Kelly Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,209
    All of the above.. Homework?
    Tell me and I forget. Teach me and I remember. Involve me and I learn.

  3. #3
    Banned
    Join Date
    Dec 2018
    Posts
    2
    机器人教育 Nice to meet you

  4. #4
    Administrator Kelly Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,209
    机器人教育 =Robot education.
    Tell me and I forget. Teach me and I remember. Involve me and I learn.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •