Results 1 to 2 of 2

Thread: Fixed End Connection Design for Purlin System

  1. #1
    Tay
    Guest

    Fixed End Connection Design for Purlin System

    Dear All,

    Would need yours help as i am working with a roof support design with purlin system. Below is the info:

    C-Lipped Purlin Size = 150(h) x 50(w) x 15(lip) x 1.6mm Thick
    Span of the Purlin = 7 meters
    Spacing between Purlin = 1 meter
    Dead Load = 0.33kpa
    Live Load = 0.75 kpa
    Wind Load = 0.50 kpa
    Connection type: Fixed End with 1 row of sag rod at midspan

    Do anyone can do the design calculation?

    Thanks

  2. #2
    Technical Fellow Kelly_Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,611
    Well, EE has a little information here --> http://www.engineersedge.com/civil_e...cture_9898.htm

    First, I would check local building construction codes. Often, they will provided pre-engineered solutions guidelines for roofs and associated structures.

    This may be simpler than you think (applying code)..

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •