Results 1 to 2 of 2

Thread: Referencing .STEP file as Basic Geometry

  1. #1
    Banned
    Join Date
    Aug 2019
    Posts
    1

    Referencing .STEP file as Basic Geometry

    Hello everyone,,
    I have searched in the Y14.5-2009 standard and online and have not been able to find an answer to this question. Is there a way to reference a step file as basic geometry to apply a profile of a surface tolerance?

    The main purpose is to define a tolerance zone for surfaces with compound curves and other shapes which are not straightforward to dimension. I would expect that these parts would be inspected with a cmm, but could also be inspected (very tediously) using manual means. I would use datums to orient the step file geometry.

    All of my searches point me to adding GD&T callouts to step files, which is not what I'm trying to do.

    Is there an accepted means for referencing step files through gd&t?

    Thanks,...

  2. #2
    Administrator Kelly Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,237
    Yes, this is a common practice of having a note that "geometry and dimensional data shall be derived from the electronic database". Some organizations have a title block area defining the reference CAD or other file (CAD, xls, stp, iges, etc.) from which manufacturing other others will use.

    These types of engineering drawings area often called "Limited Dimension Drawings" or Critical Feature Drawings.

    For more information see: https://www.engineersedge.com/ldd-cfd.htm
    Tell me and I forget. Teach me and I remember. Involve me and I learn.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •