Results 1 to 2 of 2

Thread: Pre-load on needle roller clutch

  1. #1
    Associate Engineer
    Join Date
    Aug 2019
    Location
    Canada
    Posts
    1

    Pre-load on needle roller clutch

    Can a 31 N pre-load on drawn cup HF2016 roller clutch lead to failure?
    The pre-load is due to 1.5 deg misalignment between clutch and shaft.

  2. #2
    Technical Fellow Kelly_Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,611
    Find the bearing specifications and associated design installation requirements. If the install exceeds design requirements then expect accelerated time too failure.
    Tell me and I forget. Teach me and I remember. Involve me and I learn.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •