Results 1 to 3 of 3

Thread: Learning about turbines and thinking about the output.

  1. #1

    Join Date
    Nov 2019
    Posts
    2

    Learning about turbines and thinking about the output.

    I'm in school and just learned about the massive GE Harriet turbine. It seems like the limiting factor of the turbine efficiency is the blades. I understand why they use single crystal turbine blades, because of their ability to withstand the high temperature/pressure. But couldn't they just make the blades longer to get more output? Like the current output is around 500,000 hp right? Could they double that by making the blades longer?

    Thank you,

  2. #2
    Technical Fellow Kelly_Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,611
    There are likely millions of research and testing hours into gas turbines. Also unknown number hours of in-field operation and data from which unknown number of scientist and engineers have reviewed.

    I think your question is valid and hope you always ask "why" or "why not", however please know that gas turbine are well understood.

    In my experience a critical feature was tip clearance between the compressor blade and static wall as well as the exhaust turbine blade tip.
    Tell me and I forget. Teach me and I remember. Involve me and I learn.

  3. #3

    Join Date
    Nov 2019
    Posts
    2
    Oh wow, thank you. I'll read about that.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •