Results 1 to 3 of 3

Thread: Bushing with 3/4-32 thread

  1. #1

    Bushing with 3/4-32 thread

    Hi,

    I have been looking for something off the shelf for a while now and not been able to find anything suitable, i assume its due to the tricky thread? The external thread needs to be 3/4-32, however i do not mind if its fully threaded or only up to 5mm. The ID does not need to be threaded, only requirement is its 12mm minimum . The taper is not required, i can do that myself.

    Please shout out if anyone has anything in mind that would be suitable.

    Cheers,
    A
    Attached Images Attached Images
    Last edited by adaml_509; 03-03-2020 at 04:07 AM.

  2. #2
    Administrator Kelly Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,325
    It's not standard to anything - you'll have to have one machined.
    Tell me and I forget. Teach me and I remember. Involve me and I learn.

  3. #3
    Yeah i thought so, thanks.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •