Results 1 to 4 of 4

Thread: How to design a Linkage let one point go line or a approximate line?

  1. #1

    How to design a Linkage let one point go line or a approximate line?

    no much load, just need a approximate line moving for 2 - 3 inches.
    Thanks
    Shanren

  2. #2
    Banned
    Join Date
    Mar 2021
    Posts
    19
    2 - 3 inches approximate line moving

  3. #3
    Engineer
    Join Date
    Apr 2021
    Location
    Germany
    Posts
    11
    It would be simple. If you make a circle and put another circle inside of it with a radius equal to R/2 and join them with gears to provide rotation speed by a rate of 2 to one and select a point on the smaller circle you find it with linear motion. If you have any more questions let me know.

  4. #4
    Senior Engineer
    Join Date
    Apr 2021
    Posts
    50
    Designing 4-Bar Linkages


    Step 1: Draw Coupler in its Initial and Final Positions.
    Step 2: Draw Arcs. Draw arcs from each mounting point on the output bar.
    Step 3: Draw Locus Lines. Draw a pair of lines, one connecting the intersections of each pair of arcs.
    Step 4: Draw Connecting Bars.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •