Results 1 to 2 of 2

Thread: HDMI cable repurpose?

  1. #1
    Associate Engineer
    Join Date
    Jul 2020
    Posts
    1

    HDMI cable repurpose?

    I'm putting together a pendant control for a CNC machine, and need about 14 conductors. I can get inexpensive HDMI female screw terminal breakout boards and a 6' HDMI cable would be perfect form for this application. The wires are for x/y/z axis selection, movement resolution (x1, x10, x100) and a manual pulse generator encoder with +5v,0v A and B. I'd use 24ga wires from the breakout board to the controller connector. Any reason this will not work? are there any electronics in the connectors?

  2. #2
    Administrator Kelly Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,348
    Current, voltage and crosstalk requirements would be you only concern. Possible solution.
    Tell me and I forget. Teach me and I remember. Involve me and I learn.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •