Probably using Profile of a Surface/line.
I have been Googling on how to specify this, but have not been able to find anything - hope someone can help
A plastic-piece needs to be molded to make a press-fit into a stainless steel tube (handle).
The tube is oval and asymmetric.
The press fit is made with stripes that are deformed in the press-process - see the picture, showing the lower shell of te part.
How do I specify that the outer points of the stripes must be within a specific tolerance?
Other tolerances in the part are much more relaxed.
I have some basic knowledge of GD&T, but not enough for this one
Thank you very much for the suggestion, Cragyon.
I did look at the profile, but was unsure if it was right.
If using the profile, how can I call out multiple features together with a sigle annotation?
It looks like Solidworks has a feature for this, but I'm using Fusion 360 - and again, I haven't been able to find a standardized way.
Last edited by carsten_olsen; 11-12-2020 at 09:16 AM. Reason: Messed up copy-paste
Breakout a detail view and indicate the number of occurrences that geometry occurs. Using the same datum order of precedence indicates a simultaneous requirement.
Tell me and I forget. Teach me and I remember. Involve me and I learn.
Thank you very much, Kelly, for your suggestion.
That was exactly the kind of input I was hoping for.