Results 1 to 3 of 3

Thread: metal rafters

  1. #1
    Associate Engineer
    Join Date
    May 2011
    Posts
    9

    metal rafters

    I have four sagging rafters in garage in my 1952 home. They are 2x6 and all side by side. All four have knots in about the same location, resulting in sagging. I got 4 2x6s to sister these, but that's a lot of weight to add side by side. So, Im thinking of using angle iron, as least for two of them.


    Thoughts?

    4/12 pitch. 12.5' rafter length. Single layer of shingles, which will be removed and replaced soon. House has no trusses or rafter ties. I will be adding a few rafter and collar ties.

  2. #2
    Technical Fellow Kelly_Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,611
    Can you post a picture of these sagging rafters as well as the knots?

    Also, have you consulted a structural PE on this issue? Splicing a repair vs replacement is what I'm thinking.

  3. #3
    Associate Engineer
    Join Date
    May 2011
    Posts
    9
    Quote Originally Posted by Kelly Bramble View Post
    Can you post a picture of these sagging rafters as well as the knots?

    Also, have you consulted a structural PE on this issue? Splicing a repair vs replacement is what I'm thinking.
    yes and no
    Attached Images Attached Images

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •