Results 1 to 2 of 2

Thread: Flex connector from stove to gas valve

  1. #1
    Associate Engineer
    Join Date
    Dec 2021
    Posts
    1

    Confused Flex connector from stove to gas valve

    My dad installed a flex connector from stove to gas valve. He used the 1/2 mip flare adapters. Being very old with bad eyesight, Im hoping he didnt make a mistake by installing the adapters in the wrong direction.

    Is it possible to screw the mip flare end of those adapters into the female threads of the appliance or the shutoff valve??

    Would the female flare end of the flex connector attach to the tapered side of an adapter?

  2. #2
    Administrator Kelly_Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,525
    I believe gas line connectors are standard with MIP.

    If you're concerned you should verify that the correct connectors are used.
    Tell me and I forget. Teach me and I remember. Involve me and I learn.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •