Results 1 to 3 of 3

Thread: Dispense Label Only When "Pass" signal is received from Hipot Tester

  1. #1
    Associate Engineer
    Join Date
    Sep 2022
    Posts
    1

    Dispense Label Only When "Pass" signal is received from Hipot Tester

    Hello,

    I am trying to improve our Hipot testing process. Specifically, I want a label dispenser that I can hookup the output signal of the Hipot tester to so that it outputs 1 and only 1 label when a "pass" signal is received and no labels if any other signal is received or no signal is received. Does anyone know of a good device that can do this?

    Thanks!

  2. #2
    Technical Fellow Kelly_Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,555
    Your Hipot testing equipment is where you start. Look to see if the manufacturer offers a addon that addresses your need.

    If not, consider the outputs available on the tester or equipment you use and identify potential read and print options on the market.
    Tell me and I forget. Teach me and I remember. Involve me and I learn.

  3. #3
    The Hipot equipment manufacturer would be my first source of info. Knowing the 'pass' signal output type would help tremendously.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •