Results 1 to 2 of 2

Thread: Gear box and motor selection fro a given load

  1. #1
    Associate Engineer
    Join Date
    Jun 2012
    Posts
    1

    Gear box and motor selection fro a given load

    I have a platform having weight of 1 Ton. There is a load on platform having approximately same weight (i.e. 1 Ton). The platform has to move with a speed of 150 mm/min. I have to select motor and gearbox to move this platform. Kindly help me to carry out the calculation.

    Thanks

  2. #2
    Technical Fellow
    Join Date
    Feb 2011
    Posts
    1,043
    Well, for a start you have mixed Units. If the speed is to be 150mm/min then maybe you are referring to Tonnes instead of Tons. Big difference.

    Also, a quick read of the "Students" section of this might be helpful too.
    http://www.engineersedge.com/enginee...Posting-Policy

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •