Results 1 to 6 of 6

Thread: Budget for a Mosquito coil making factory in terms of machinery

  1. #1
    Associate Engineer
    Join Date
    Jun 2012
    Posts
    2

    Budget for a Mosquito coil making factory in terms of machinery

    I want to build a mosquito coin production factory. can anybody help me to get the actual initial cost for this factory in individual category.

  2. #2
    Administrator Kelly Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,314
    ? I think you need somebody experienced in this specific area... Chances of finding that person here, who knows.

    Sounds like what you need a business plan...

  3. #3
    Hahahahah!

  4. #4
    Lead Engineer RWOLFEJR's Avatar
    Join Date
    Mar 2011
    Location
    Rochester Pennsylvania
    Posts
    396
    That's a pretty broad request but I'll toss a couple things out there for you.

    First off... If this is indeed something you want to do then you'd better be ready to do some research and work. You can't order up a manufacturing plant like you're calling for a pizza.

    So you want to make mosquito coils...
    From what I recall using the smelly things... they appeared to be molded. So you might want to start by looking at mixing equipment and some sort of means for filling molds? Then I'd guess they would need to run through a conveyor oven of some sort to dry them?

    Good luck,
    Bob

  5. #5
    Associate Engineer
    Join Date
    Sep 2012
    Location
    UK - London
    Posts
    6
    Hi there,

    The mould's themselves aren't very expensive. I guess between 500 to 2000 per mould depending on shots/lifetime.

    The machine, you can buy second hand - I guess $5000 to $10000 - assuming you have engineering support to maintain it.

    thanks / simon

  6. #6
    Technical Fellow jboggs's Avatar
    Join Date
    Mar 2011
    Location
    Myrtle Beach, SC
    Posts
    821
    I've got your answer right here -
    dilbert.jpg

    My favorite!

    Seriously, start with some specifications (how many of what, etc.). Your question is WAY TOO general!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •