Related Resources: Engineers Edge
'Air shower' saves 50 percent water
Engineering Design and Technology News Home
Dr Jie Wu, a fluids specialist at CSIRO, says the Oxijet nozzle developed by New Zealand company Felton in collaboration with CSIRO, feels just as wet and strong as a full flow shower, but uses much less water. He said it also differs from traditional 'low flow' devices.
"Traditional flow restrictors reduce flow and pressure, whereas Oxijet uses the flow energy to draw air into the water stream, making the water droplets hollow," Dr Wu said.
|
The nozzle can be fit to most existing shower heads. |
With all Australian states currently under water restrictions or permanent water efficiency measures, household water use is decreasing but prices are going up, according to the Australian Bureau of Statistics. Oxijet could provide a cost effective way to reduce household water consumption, without effecting comfort.
The device was recently trialled by Novotel Northbeach in Wollongong and is planned to be installed across the whole hotel.
"With over 200 rooms we go through over 10 million litres of water per year, so any saving we can make is very important. We've found our customers prefer Oxijet over other 'low flow' shower heads, because it gives the illusion of full water pressure," Mr Walter Immoos, General Manager of Novotel Northbeach said.
Roger Marty, General Manager of Felton, said CSIRO's expertise was invaluable when developing Oxijet.
"The concept of using an aerated showerhead to save water is not new, but the technology behind our device using an aerator insert allows the device to work with existing showers already installed. Our engineers worked with Dr Wu's team to turn the concept into an inexpensive, quality product," he said.
'Air shower' saves 50 per cent water video: Dr Jie Wu, fluids specialist talks about how Oxijet works. |
Link to this Webpage:
© Copyright 2000 -
2024, by Engineers Edge, LLC
www.engineersedge.com
All rights reserved
Disclaimer |
Feedback
Advertising
| Contact