Engineering Design Data: Menu - finishing

 

Electroplating Thickness Recommendation Chart Table
Recommended Minimum Thicknesses for Nickel or Chromium Finishes on Steel, Iron, and Zinc Products Chart Table.
Ceramic Epoxy Coating Review
Ceramic Epoxy coatings are unique abrasion resistant coating that protects by binding ceramic particles to a resin system, thus creating an encapsulating ceramic shell.
Fasteners Coatings Review
Fasteners, bolts, screws and nuts are often treated or coated as required by environment or application, The coating is a covering that is applied to the surface of the fastener.
Inorganic Zinc Coatings Review
Inorganic zinc coatings require an extremely clean surface for application. SSPC-SP 10, SSPC-SP 5, or application to a clean, pickled surface is generally required.
Phosphate Coatings Review
Phosphate coatings are used on steel parts for corrosion resistance, lubricity, or as a foundation for subsequent coatings or painting.
Quench Polish Quench QPQ Hardening
Quench polish quench (QPQ) is a specialized type of nitrocarburizing case hardening that increases corrosion resistance, originally developed by the Kolene Company. The name refers to the three steps involved: nitrocarburizing, polishing, and post-oxidizing.
Engineers Edge Surface Roughness Comparator Shop Set - microinch, Engineering Supplies and Book Store
Surface Roughness comparator Shop Set contains four surface finish roughness comparator scales and provides specimens of a full range of roughness averages (Ra) | Surface Roughness Comparator Plate

© Copyright 2000 - 2017, by Engineers Edge, LLC All rights reserved.
Disclaimer