Engineering Design Data: Menu - hardware

 
ANSI ISO Engineering Hardware
Prev Page | Next Page

Pages: << 8 9 10 [11] 12 13 14

Inch Series Socket Head Shoulder Screws
Inch Series Socket Head Shoulder Screws size chart per. ASME B18.3.
Standard Metric Keys Keyways for Metric Bores with One Key
Metric Keyway Dimensions Per ISO/R773 – P9 Width Tolerance H and Metric Key & Keyway Dimensions Per ISO/R773 – D10 Width Tolerance.
Metric Key Keyway Dimensions
Metric Key Keyway Dimensions Per ISO/R773 - Js9 Width Tolerance Table CHart
Pipe Thread Installation Torque Table Chart
Brass and steel Pipe thread (NPT) installation procedure and torque specification table and chart.
ISO Metric Wrench Bolt Size Table Chart
This table chart defines the standard ISO metric wrench size for Metric Hex Head Bolts.
Internal ACME Thread General Purpose Size Chart
The following table defines recommended industry standard sizes for Internal ACME General Purpose Threads per American National Standard ASME/ANSI B1.5. All dimensional data is given in inches.
External ACME Thread General Purpose Size Table Chart
External general purpose ACME Thread size table chart There are three classes of General Purpose ACME threads, 2G, 3G, and 4G each class provides some clearance on all standard size diameters for free movement, and are used in assemblies with the internal thread rigidly fixed and movement of the external thread in a direction perpendicular to its axis limited by its bearing or bearings.
Torque vs Tension Bolts Table Chart SAE J429 Bolts
The following chart estimates the applied tension clamp force at a defined torque and friction for SAE J429 Grade 2, 5 and 8 bolts.
Fastener Material Galvanic Compatibility Table Chart
The following chart defines bolt installation materials galvanic corrosion compatibility.
Internal Thread Dimensions for Class 5 Interference-Fit Threads
Internal Thread Dimensions for Class 5 Interference-Fit Threads ANSI/ASME B1.12-1987 (R1998). The following thread detail specifications are typical for studs applications. Data within design chart is based on internal threaded members being steel ASTM A-325 (SAE Grade 5) or better. Le = length of engagement.
Prev Page | Next Page

Pages: << 8 9 10 [11] 12 13 14

© Copyright 2000 - 2021, by Engineers Edge, LLC All rights reserved.
Disclaimer