Engineering Design Data: Menu - hardware

 
ANSI ISO Engineering Hardware
Prev Page | Next Page

Pages: << 5 6 7 [8] 9 10 11 >>

Horsepower Ratings Roller Chain No. 25 Table 1/4 inch
Horsepower Ratings for ANSI Roller Chains Table 1/4 inch No. 25
Single Strand Roller Chain Number 35 Size Table
Horsepower Ratings for ANSI Roller Chains Table For 3/8" Pitch Standard Single-Strand Roller Chain Number 35
Precision Sprockets Caliper Diameters per ANSI/ASME B29.1M
Tolerances for Caliper Diameters of Precision Sprockets ANSI/ASME B29.1M
Roller Chain Sprocket Diameters Dimesions per. ANSI/ASME B29.1M
ANSI Roller Chain Sprocket Diameters and Dimensions per. ANSI/ASME B29.1M
Chain Attachments per. ANSI and ASME
Standard chain components can be adapted for use in conveying, elevating, and timing operations and are known as “attachments.”
ISO Metric Dowel Pins per DIN EN ISO 8734
DIN EN ISO 8734. Parallel pins, of hardened steel and martensitic stainless steel.
American Metric Washers s ANSI B18.22M Size Table
Metric plain washers should be specified in the sequence : description, nominal size, series, material type, and finish, if required.
Metric Hex Jam Nuts and Heavy Hex Nuts
Standard Metric Hex Jam Nuts and Heavy Hex Nuts ANSI B18.2.4.5M and B18.2.4.6M
Standard Metric Torque Hex Nuts Size Data Table
Standard Prevailing-Torque Metric Hex Nuts Size Data Table. Property Classes 5, 9, and 10, ANSI/ASME B18.16.3M
Metric Hex Flange Nuts Size Dimension Table
Standard Metric Hex Flange Nuts Size Dimension Table per
Prev Page | Next Page

Pages: << 5 6 7 [8] 9 10 11 >>

© Copyright 2000 - 2021, by Engineers Edge, LLC All rights reserved.
Disclaimer