Metric Slotted Hex Nuts per ANSI B18.2.4.4M

Metric ISO Hardware Engineering Data
Inch ANSI Hardware Engineering Data
Fastener and Screw / Bolt Design, Formula & Calculations

Width Across Metric Nut Flats

The width across flats of nut shall be the distance measured, perpendicular to the axis of nut, overall between two opposite sides of the nut in accordance with the notes on respective dimensional tables. For milled- from-bar hex nuts, the nominal bar size used shall be the closest commercially available size to the specified basic width across flats of the nut. For milled-from- bar nonferrous nuts, the tabulated maximum (basic) width acrws flats dimensions may be exceeded to con- form with the commercial tolerances of drawn or rolled bar stock material.

Metric Nut Thickness

The nut thickness shall be the overall distance, measured parallel to the axis of nut, from the top of the nut to the bearing surface and shall include the thickness of the washer face where provided

Slotted HEx Nut

Standard Metric Slotted Hex Nuts
per ANSI B18.2.4.4M

Nut Diameter
x
Thread Pitch
Width
S
Width
E
Thickness
M
Bearing
Face
Dia.
Dw

Thickness
F

Width Slot
N
Thickness
C
Max
Min
Max
Min
Max
Min
Min
Max
Min
Max
Min
Max
Min
M5 × 0.8
8.00
7.78
9.24
8.79
5.10
4.80
6.9
3.2
2.9
2.0
1.4
M6 × 1
10.00
9.78
11.55
11.05
5.70
5.40
8.9
3.5
3.2
2.4
1.8
M8 × 1.25
13.00
12.73
15.01
14.38
7.50
7.14
11.6
4.4
4.1
2.9
2.3
aM10 × 1.5
15.00
14.73
17.32
16.64
10.0
9.6
13.6
5.7
5.4
3.4
2.8
0.6
0.3
M10 × 1.5
16.00
15.73
18.48
17.77
9.30
8.94
14.6
5.2
4.9
3.4
2.8
M12 × 1.75
18.00
17.73
20.78
20.03
12.00
11.57
16.6
7.3
6.9
4.0
3.2
M14 × 2
21.00
20.67
24.25
23.35
14.10
13.40
19.6
8.6
8.0
4.3
3.5
M16 × 2
24.00
23.67
27.71
26.75
16.40
15.70
22.5
9.9
9.3
5.3
4.5
M20 × 2.5
30.00
29.16
34.64
32.95
20.30
19.00
27.7
13.3
12.2
5.7
4.5
0.8
0.4
M24 × 3
36.00
35.00
41.57
39.55
23.90
22.60
33.2
15.4
14.3
6.7
5.5
0.8
0.4
M30 × 3.5
46.00
45.00
53.12
50.85
28.60
27.30
42.7
18.1
16.8
8.5
7.0
0.8
0.4
M36 × 4
55.00
53.80
63.51
60.79
34.70
33.10
51.1
23.7
22.4
8.5
7.0
0.8
0.4

a This size with width across flats of 15 mm is not standard. Unless specifically ordered, M10 slotted hex nuts with 16 mm width across flats will be furnished.

All dimensions are in millimeters.

Metric nuts of other materials, such as stainless steel, brass, bronze, and aluminum alloys, have properties as agreed upon by the manufacturer and purchaser. Properties of nuts of several grades of non-ferrous materials are covered in ASTM F467M.

Unless otherwise specified, metric nuts are furnished with a natural (unprocessed) finish, unplated or uncoated.

Contribute Article
Spider Optimizer

© Copyright 2000 - 2017, by Engineers Edge, LLC www.engineersedge.com
All rights reserved
Disclaimer | Feedback | Advertising | Contact


User Reviews/Comments:

There are currently no comments available.


Add a Comment (you must be logged in to post comment Register):
Name:
Email: (Optional)
Comment: