Synchroscope Review

Electronic Electrical Devices | Electronic Electrical Components

Synchroscope Review

A synchroscope indicates when two AC generators are in the correct phase relation for connecting in parallel and shows whether the incoming generator is running faster or slower than the on-line generator. The synchroscope consists of a two-phase stator. The two stator windings are at right angles to one another, and by means of a phase-splitting network, the current in one phase leads the current of the other phase by 90°, thereby generating a rotating magnetic field. The stator windings are connected to the incoming generator, and a polarizing coil is connected to the running generator.

The rotating element is unrestrained and is free to rotate through 360°. It consists of two iron vanes mounted in opposite directions on a shaft, one at the top and one at the bottom, and magnetized by the polarizing coil.

If the frequencies of the incoming and running generators are different, the synchroscope will rotate at a speed corresponding to the difference. It is designed so that if incoming frequency is higher than running frequency, it will rotate in the clockwise direction; if incoming frequency is less than running frequency, it will rotate in the counterclockwise direction. When the synchroscope indicates 0o phase difference, the pointer is at the "12 o’clock" position and the two AC generators are in phase.

Contribute Article Spider Optimizer

© Copyright 2000 - 2018, by Engineers Edge, LLC
All rights reserved
Disclaimer | Feedback
Advertising | Contact | Privacy Policy


Spider Optimizer

Engineering Book Store
Engineering Forum
Excel App. Downloads
Online Books & Manuals
Engineering News
Engineering Videos
Engineering Calculators
Engineering Toolbox
GD&T Training Geometric Dimensioning Tolerancing
DFM DFA Training
Training Online Engineering
Advertising Center

Copyright Notice

Publishing Program