Related Resources: materials
American Standard Aluminum Channel Sizes Table
Structural Engineering Shapes and Materials
Aluminum 6061 is the most commonly used and available for aluminum channel. 6061 has good strength-to-weight ratio with good corrosion resistance. 6061 is easily cold worked and formed in the annealed condition.
American Standard Aluminum Channel Sizes Table
Designation |
Depth |
Width |
Flange |
Average |
Web |
Fillet |
Tip |
d1 |
2 x 1.22 3 x 1.42 3 x 1.73 3 x 2.07 4 x 1.85 4 x 2.16 4 x 2.50 5 x 2.32 5 x 3.11 5 x 3.97 6 x 2.83 6 x 3.00 6 x 3.63 6 x 4.50 7 x 3.54 7 x 4.23 7 x 5.10 7 x 5.96 |
2.000 3.000 3.000 3.000 4.000 4.000 4.000 5.000 5.000 5.000 6.000 6.000 6.000 6.000 7.000 7.000 7.000 7.000 |
1.410 1.410 1.498 1.596 1.580 1.647 1.720 1.750 1.885 2.032 1.920 1.945 2.034 2.157 2.110 2.194 2.299 2.404 |
0.170 0.170 0.170 0.170 0.180 0.180 0.180 0.190 0.190 0.190 0.200 0.200 0.200 0.200 0.210 0.210 0.210 0.210 |
0.273 0.273 0.273 0.273 0.297 0.297 0.297 0.320 0.320 0.320 0.343 0.343 0.343 0.343 0.367 0.367 0.367 0.367 |
0.170 0.170 0.258 0.356 0.180 0.247 0.320 0.190 0.325 0.472 0.200 0.225 0.314 0.438 0.230 0.314 0.419 0.524 |
0.270 0.270 0.270 0.270 0.280 0.280 0.280 0.290 0.290 0.290 0.300 0.300 0.300 0.300 0.310 0.310 0.310 0.310 |
0.100 0.100 0.100 0.100 0.110 0.110 0.110 0.110 0.110 0.110 0.120 0.120 0.120 0.120 0.130 0.130 0.130 0.130 |
0.75 1.75 1.75 1.75 2.75 2.75 2.75 3.75 3.75 3.75 4.50 4.50 4.50 4.50 5.50 5.50 5.50 5.50 |
Moment of Inertia Shape Area
Designation C |
Area |
Axis x-x |
Axis y-y |
y-axis |
||||
Ix |
Sx |
rx |
Iy |
Sy |
ry |
|||
2 x 1.22 3 x 1.42 3 x 1.73 3 x 2.07 4 x 1.85 4 x 2.16 4 x 2.50 5 x 2.32 5 x 3.11 5 x 3.97 6 x 2.83 6 x 3.00 6 x 3.63 6 x 4.50 7 x 3.54 7 x 4.23 7 x 5.10 7 x 5.96 |
1.04 1.21 1.47 1.76 1.57 1.84 2.13 1.97 2.64 3.38 2.40 2.55 3.09 3.83 3.01 3.60 4.33 5.07 |
0.622 1.66 1.85 2.07 3.83 4.19 4.58 7.49 8.90 10.4 13.1 13.6 15.2 17.4 21.8 24.2 27.2 30.3 |
0.622 1.10 1.24 1.38 1.92 2.10 2.29 3.00 3.56 4.17 4.37 4.52 5.06 5.80 6.24 6.93 7.78 8.64 |
0.774 1.17 1.12 1.08 1.56 1.51 1.47 1.95 1.83 1.76 2.34 2.31 2.22 2.13 2.69 2.60 2.51 2.44 |
0.172 0.20 0.21 0.31 0.32 0.37 0.43 0.48 0.63 0.81 0.69 0.73 0.87 1.05 1.01 1.17 1.38 1.59 |
0.188 0.20 0.21 0.27 0.28 0.31 0.34 0.38 0.45 0.53 0.49 0.51 0.56 0.64 0.64 0.70 0.78 0.86 |
0.407 0.40 0.41 0.42 0.45 0.45 0.45 0.49 0.49 0.49 0.54 0.54 0.50 0.52 0.58 0.57 0.56 0.56 |
0.49 0.44 0.44 0.46 0.46 0.45 0.46 0.48 0.48 0.51 0.51 0.51 0.50 0.51 0.54 0.52 0.53 0.55 |
Reference: Aluminum Association Standard Structural Profiles - 2020