materials | Engineering Materials

Engineering Design Data: Menu - materials

Engineering Materials

Pages: 1 2 [3] 4 5 6 >>

Prescribes requirements and tests for vulcanized rubber gaskets of four different types for various applications. Each type is divided into a number of classes in different hardness ranges. Types-Vulcanized rubber gaskets shall be of four types depending upon the service conditions and applications, namely:

Design and Equations Springs Flat Rectangular Stock

Design and Equations for Springs Made from Flat Rectangular Cold Rolled Strip Stock

Rectangular Section Bar Steel Springs

Springs Made From Rectangular Section Bar Steel Design and Calculations

Spring Materials Modulus of Elasticity used in Torsion and Tension

Typical Modulus of Elasticity of Spring Materials used in Torsion and Tension

Aluminum Alloys Temper designation and subdivisions

Basic temper designation and subdivisions from aluminum alloys

Densities of Metals and Elements Table

Density is defined as the mass per unit volume. Densities of Metals and Elements Table

Chemical Cleaning of Industrial Water Systems

Chemical cleaning of water systems can be divided into two classifications: pre-operational and remedial. Pre-operational cleaning is performed to prepare the water-contacted metal surfaces to receive chemical treatment, which provides protection from scale, corrosion, and microbiological growth.

Canadian Channel Sizes Table

Structural extrusion aluminum channels sizes table per Canada Standard.

American Standard Aluminum Channel Sizes Table

American Standard Aluminum Channel Sizes Table. Aluminum 6061 is the most commonly used and available for aluminum channel. 6061 has good strength-to-weight ratio with good corrosion resistance. 6061 is easily cold worked and formed in the annealed condition.

Aluminum Channel Table Aluminum Association Standard

Structural extrusion aluminum channels sizes table per Aluminum Association Standard.

Prev Page | Next Page

Pages: 1 2 [3] 4 5 6 >>