Engineering Design Data: Menu - materials

 
Engineering Materials
Prev Page | Next Page

Pages: << 2 3 4 [5] 6 7

Normalizing Annealing Tool Steels Table Chart
Normalizing and Annealing Temperatures of Tool Steels Table Chart. Annealing is the steady heating of a metal at a certain temperature above the recrystallization phase followed by a gradual cooling process.
Heat Treating Stainless Steels Table Chart
Stainless steels are heat-treated based on the stainless steel type and the target end item requirements. Heat treatment methods, such as stress relieving, hardening and annealing, strengthen the ductility and corrosion resistance properties of the metal that is modified during fabrication, or generate hard structures capable of tolerating abrasion and high mechanical stresses.
Alloy Steel Heat Treating Normalizing, Annealing Temperature Table Chart
The following are Hardenable Grades of Alloy Steel and the perspective normalizing temperature, annealing temperature and quenching medium table chart.
Chromium Nickel Steels Not Hardenable by Heat Treating Table Chart
The following table chart lists chromium nickel steel that is not hardenable by heat treating.
Heat Treating Tool Steels Manufacturing Table Chart
Heat Treating Tool Steels Manufacturing Table Chart. When the high-temperature heating is carried out in a salt bath, the range of temperatures should be about 15ºC (25ºF) lower than given in this line.
Carbon Steel Typical Heat Treatments Case Hardening Grade Table Chart
Case hardening grades, method and process requirements for carbon steel. Case hardening processes harden only the exterior of the steel part, creating a hard, wear resistant skin (the "case") but preserving a tough and ductile interior.
Metal Melting Temperatures
Melting Temperature of Metals Table Chart. The melting point (or, rarely, liquefaction point) of metals is the temperature at which a substance changes state from solid to liquid at atmospheric pressure. Aluminum Melting Point, Steel Melting Point, Gold Melting Temperature
Composite Engineering Materials Review
A composite is a material consisting of two (or more) different materials bonded together, one forming a "matrix" in which are embedded fibers or particles that increase the strength and stiffness of the matrix material.
Steel Section Properties and Dimensions Wide I-Beam Chart | BS 4-1 | EN 1993-1-1
British Standard Steel Section Properties Chart & Dimensions Wide I-Beam | BS 4-1 | EN 1993-1-1 Sizes 356 x 406 x 634 to 152 x 152 x 23
Steel Section Properties and Dimensions I-Beam Chart BS 4-1
British Standard Steel Section Properties Chart & Dimensions I-Beam | BS 4-1 | EN 1993-1-1
Prev Page | Next Page

Pages: << 2 3 4 [5] 6 7

© Copyright 2000 - 2021, by Engineers Edge, LLC All rights reserved.
Disclaimer