Related Resources: materials

Mechanical Properties of Copper Wire

Mechanical Properties of Copper Wire

The most common copper is C11000 - electrolytic tough pitch. Its electrical conductivity exceeds 100 percent IACS and is invariably selected for most wire and cable applications. Selective properties of wire produced to ASTM B1 Hard Drawn Copper Wire, B2 Medium Hard Drawn Copper Wire, and B3 Soft or Annealed Copper Wire are shown in the table calculator below.

Sources:

ASTM B1, extracted via. various references

Related

• Copper Temper Designation Codes
• Working Internal Pressure for Copper Tube Solder or Brazing Joints Based on ASME Standard B31.9
• Copper Copper Plating Specification Mil-C-14550
• Copper UNS Number and Alloys The Unified Numbering System for Copper
• Copper Tubing Size Chart ASTM B88 Dimensions and Physical Characteristics of Copper Tube: TYPE K
• Copper Tubing HVAC Size Chart Copper Tubing HVAC Size Table
• Copper Tube Size Chart Medical Gas, K and L Copper Tube: Medical Gas, K and L per. ASTM B 819.
• Mil-C-14550B, Copper, (Under Coat)
• Copper UNS Number Alloys Table and Chart
• Copper Tubing Size Chart ASTM B-88
• Copper Tube Joints Working Pressure Solder or Brazing Joints Based on ASME Standard B31.9
• Copper Tubing HVAC Size Chart
• AWG Copper Wire Size Table and Data Chart @ 100 Degrees F
• Copper Tubing Friction Flow Losses Pipes 1.25 to 1.50 inch dia.
• Copper Pipe Flow Friction Loss Size 0.5 to 1.00 inch diameter
• Friction Flow Losses Copper Tubing 2 to 3 inches dia.
• Allowable Copper Conductor Ampacities