|
|||||||||
|
|||||||||
| Penstock Out-Of-Roundness |  |  | |
Post Reply |
Mechanical Engineering Forum |
||
| Posted by: sgarro ® 12/10/2010, 17:47:35 Author Profile eMail author Edit |
Good afternoon. Which is the allowable out-of-roundness for an exposed penstock installation? Material: ASTM A516 gr70
Some sections of the penstock are like an oval; the vertical diameter measure is less than the horizontal measure. Thanks
|
| Post Reply Tell a Friend (must be logged in) Alert Admin About Post |
Previous | | |
© Copyright 2000 - 2024, by Engineers Edge, LLC All rights reserved. Disclaimer
