Training Signup Form
If you already have an account on our website, please
log in
to continue
*
Membership Type
GD&T Geometric Dimensioning and Tolerancing Training, 4 PDH
$99.95 for 90 days
GD&T Geometric Dimensioning & Tolerancing Training per., ASME Y14.5 - 2009
For more details please visit:
GD&T Geometric Dimensioning & Tolerancing Training per., ASME Y14.5 - 2009, 4 PDH
Geometrical Tolerancing G&T Training, ISO 1101
$69.95 for 90 days
Geometrical Tolerancing G&T Training, ISO 1101, 4 PDH
For more details please visit:
G&T Geometrical Dimensioning & Tolerancing Training per., ISO1101, 4 PDH
Differences ASME and ISO GD&T
$19.95 for 90 days
Quick Guide to the Differences Between ASME Y14.5-2009 and ISO 1101 Geometric Dimensioning and Tolerancing
For more details please visit:
Differences Between ASME and ISO GD&T
Design for Plastic Injection Molding
$69.95 for 90 days
Fundamentals Design for Plastic Injection Molding, Plastic Extrusion, Extrusion Blow Molding and Plastic Vacuum Thermoform 4 PDH
For more details please visit:
Design for Plastic Injection Molding
Powder Coating Part Design Guidelines
$19.95 for 90 days
Powder Coating Part Design Guidelines, 2 PDH. These are basic guidelines for designers and engineers to use in the development of parts that may be finished with a powder coat finish.
For more details please visit:
Powder Coating Part Design Guidelines
Centrifugal and Positive Displacement Pump Basics, 3 PDH
$39.95 for 90 days
The pumps widely used in industry and by commercial buildings and municipalities, can almost all be classified as either centrifugal pumps or positive displacement pumps.
For more details please visit:
Centrifugal and Positive Displacement Pump Basics
Flow Measurement in Pipes and Ducts, 3 PDH
$39.95 for 90 days
This course is about measurement of the flow rate of a fluid flowing under pressure in a closed conduit. The closed conduit is often circular, but also may be square or rectangular (such as a heating duct) or any other shape.
For more details please visit:
Flow Measurement in Pipes and Ducts
Fluid Flow Fundamentals Training, 6 PDH
$69.95 for 90 days
Fluid flow is an important part of many industrial processes. This course cover fundamental approaches to fluid flow calculations and analysis, with emphasis on fluid flow in piping systems and the use of pumps in those systems.
For more details please visit:
Flow Measurement in Pipes and Ducts
Heat Exchangers Fundamentals, 2 PDH
$39.95 for 90 days
Heat exchangers are used to heat one fluid with a hotter fluid, to cool a fluid with a cooler fluid, to condense a gaseous fluid with a colder fluid, or to boil a liquid with a hotter fluid.
For more details please visit:
Flow Measurement in Pipes and Ducts
Heat Transfer Fundamentals, 3 PDH
$49.95 for 90 days
Heat transfer is of concern across several engineering disciplines. This course provides a review of basic heat transfer principles, including a summary of commonly used heat transfer terms, and a summary of the principles of and calculations used for conduction heat transfer, convection heat transfer, and radiation heat transfer.
For more details please visit:
Heat Transfer Fundamentals
Hydraulic Valve Fundamentals, 4 PDH
$49.95 for 90 days
Valves are widely used in fluid piping systems to shut off or throttle flow, as well as to prevent backflow, reduce pressure or relieve pressure. This course provides information about the basic components of a valve and their function.
For more details please visit:
Hydraulic Valve Fundamentals
Pipe Flow / Friction Factor Calculations with Excel, 3 PDH
$49.95 for 90 days
Several kinds of pipe flow calculations can be made with the Darcy-Weisbach equation and the Moody friction factor. Also, these calculations can be conveniently carried out with an Excel spreadsheet.
For more details please visit:
Pipe Flow / Friction Factor Calculations with Excel, 3 PDH
Arc Welding Fundamentals, 6 PDH
$39.95 for 90 days
Fundamentals of Arc Welding – This is a 6-hour course that provides the learner with the basic understanding of the theory, principles, methods, and techniques related to modern arc welding.
For more details please visit:
Fundamentals of Arc Welding
Cathodic Electrochemical Corrosion Protection, 4 PDH
$39.95 for 90 days
This course describes the procedures for designing a cathodic protection system, using a sacrificial anode or an anode with impressed electrical current to prevent electrochemical corrosion.
For more details please visit:
Cathodic Electrochemical Corrosion Protection
Lubrication Fundamentals, 2 PDH
$29.95 for 90 days
This course, the learner will be introduced to the basics of lubrication, friction and wear and how lubrication is used to reduce friction in typical applications.
For more details please visit:
Lubrication Fundamentals, 2 PDH
Improving Fan System Performance, 4 PDH
$39.95 for 90 days
Fan systems are used for a wide variety of industrial applications. This course presents an introduction to fans and fan systems; fan problems and maintenance procedures; and procedures for improving fan efficiency.
For more details please visit:
Improving Fan System Performance, 4 PDH
Project Management Basics, 4 PDH
$58.95 for 90 days
Project management is the discipline of planning, organizing, securing, managing, leading, and controlling resources to achieve specific goals.
For more details please visit:
Project Management Basics, 4 PDH
Biofuels Basics, 3 PDH
$29.95 for 90 days
Biofuels include ethanol from grain or sugar, diesel fuel from soybeans, ethanol from cellulosic feedstock, and several other feedstock/fuel combinations. This course provides information about the Biomass Research and Development Board's seven point Action Plan for development of biofuels.
For more details please visit:
Biofuels Basics, 3 PDH
Fuel Cells - Green Power, 3 PDH
$39.95 for 90 days
This three PDH course provides information about various aspects of the hydrogen-based fuel cell and an introduction to several other fuels and fuel cell technologies. Hydrogen fuel cells present great promise for the future and have significant advantages over the internal combustion engine, or even hybrid technologies for automobile use.
For more details please visit:
Fuel Cells - Green Power, 3 PDH
Geothermal Energy, 3 PDH
$29.95 for 90 days
The geothermal energy potential beneath our feet is vast. This tremendous resource amounts to 50,000 times the energy of all oil and gas resources in the world. Also, geothermal energy is clean.
For more details please visit:
Geothermal Energy, 3 PDH
Photovoltaic Fundamentals, 6 PDH
$49.95 for 90 days
The use of photovoltaic systems for converting sunlight into electricity has been expanding rapidly. This course includes an overview of progress in the field; basic information about the photovoltaic effect; discussion of several different types of solar cells (including single-crystal silicon, semi-crystalline & polycrystalline silicon, thin-film solar cells, gallium arsenide PV cells, and multifunction devices); and information about modules, arrays and systems of solar PV cells.
For more details please visit:
Photovoltaic Fundamentals, 6 PDH
Transpired Solar Collectors, 2 PDH
$29.95 for 90 days
A transpired solar collector reduces the load on a building’s heating system by heating intake air with solar energy. It preheats the ambient air by up to 40°F, reducing all or a portion of the load on a heating system during day light hours.
For more details please visit:
Transpired Solar Collectors, 2 PDH
Fundamentals Design for Machining, Milling Operations, 3 PDH
$39.95 for 90 days
This course is perfect for anybody in the design, engineering or other technical role whom specify dimensional or geometric requirements for parts or assemblies that will be manufactured by milling.
Payment System
All major Credit Cards Accepted
Visa, MasterCard, American Express
*
First & Last Name
*
Your E-Mail Address
a confirmation email will be sent to you at this address
*
Choose a Username
it must be 4 or more characters in length
may only contain letters, numbers, and underscores
*
Choose a Password
must be 4 or more characters
*
Confirm Your Password