The following is a knowledge assessment test of ASME Y14.5-2018 GD&T. Please keep in mind, that this is not a pass or fail test. The results will be kept confidential except to you.

Access Training & Process Payment: Training Signup Form

All Online Training Courses: Review and Signup Form

Online GD&T Geometric Dimensioning & Tolerancing Training per., ASME Y14.5 - 2018, 4 PDH

COURSE HIGHLIGHTS

Online certificate training program for the Fundamentals of ASME Y14.5-2018, Geometric Dimensioning and Tolerancing (GD&T).

This training module will be available for 90 days after payment has been received.

Professional Development Hours (PDH) earned = 4.0 hours (Takes approximately 4 hours to complete).

This is an entry level training program and is best for those whom need an introduction to the concepts of dimensioning and tolerancing per. ASME Y14.5 - 2018, Geometric Dimensioning and Tolerancing.

The program is divided up into nine separate training modules with quizzes and one final test. Training modules are presented in a Power Point format with voice narration. Training pace is controlled by learner and all training modules may be repeated multiple times. The individual training modules will take between 10 and 25 minutes and include:

• Down-loadable Geometric Characteristic Reference Chart

• Differences between ASME and ISO geometric characteristics and symbols.
• Glossary and Terms
• Introduction and ASME Rules
• Limit Tolerances
• Datum's
• Datum Targets
• Feature Control Frame
• Form Tolerances
• Orientation Tolerances
• Location Tolerances
• Profile Tolerances
• Runout Tolerances
• Final Knowledge Test (required for certificate of completion)

One must receive an 80% correct or greater on all training modules quiz’s, as well as the final knowledge test to receive the Certificate of Training (instant download).

Course Author Profile Kelly L Bramble

Access Training & Process Payment: Training Signup Form

All Online Training Courses: Review and Signup Form

Quick Guide to the Differences Between ASME Y14.5-2009 and ISO 1101 Geometric Dimensioning and Tolerancing

Highlights:

This course document is free for individuals whom have attended Engineers Edge (Kelly Bramble's) ASME or ISO GD&T seminars.

This module will be available for 60 days after enrolment has been received.

Professional Development Hours (PDH) earned = 0 hours. At this time, no PDH credits are available.

This documents goal is to overview the differences between ASME Y14.5-2009 and ISO 1101 Geometric Dimensioning and Tolerancing (GD&T) standards. The author makes no claim as to which standard may or may not be better or is preferred. Many of the differences are minor however many are not.

Overview:

The following are the technology requirements for this training course.

• Modern computer (PC with windows or MAC) not older than 8 years should do it.
• Flash Player 10 Shockwave (Free), Windows or MAC: GET IT HERE.

Course Author Profile Kelly L Bramble

To enrol in this activity, the following is required:

1. An account within this training center - Login or Register
2. Author provided "Enrolment key".  Please email author at trainer at engineersedge.com  --> Replace "at" with @ (Anti-Spam Thing).

Access Training & Process Payment: Training Signup Form

All Online Training Courses: Review and Signup Form

Online GD&T Geometric Dimensioning & Tolerancing Training per., ASME Y14.5 - 2009, 4 PDH

COURSE HIGHLIGHTS

Online certificate training program for the Fundamentals of ASME Y14.5-2009, Geometric Dimensioning and Tolerancing (GD&T).

This training module will be available for 90 days after payment has been received.

Professional Development Hours (PDH) earned = 4.0 hours (Takes approximately 4 hours to complete).

This is an entry level training program and is best for those whom need an introduction to the concepts of dimensioning and tolerancing per. ASME Y14.5 - 2009, Geometric Dimensioning and Tolerancing.

The program is divided up into nine separate training modules with quizzes and one final test. Training modules are presented in a Power Point format with voice narration. Training pace is controlled by learner and all training modules may be repeated multiple times. The individual training modules will take between 10 and 25 minutes and include:

• Down-loadable Geometric Characteristic Reference Chart

• Differences between ASME and ISO geometric characteristics and symbols.
• Glossary and Terms
• Introduction and ASME Rules
• Limit Tolerances
• Datum's
• Datum Targets
• Feature Control Frame
• Form Tolerances
• Orientation Tolerances
• Location Tolerances
• Profile Tolerances
• Runout Tolerances
• Final Knowledge Test (required for certificate of completion)

One must receive an 80% correct or greater on all training modules quiz’s, as well as the final knowledge test to receive the Certificate of Training (instant download).

Course Author Profile Kelly L Bramble

Access Training & Process Payment: Training Signup Form

All Online Training Courses: Review and Signup Form

Fundamentals Geometrical Tolerancing G&T, ISO 1101, 4 PDH

COURSE HIGHLIGHTS

Online certificate training program for the Fundamentals of ISO 1101, Geometrical Tolerancing (G&T).

This training module will be available for 60 days after payment has been received.

Professional Development Hours (PDH) earned = 4.0 hours (Takes approximately 4 hours to complete).

This is an entry level training program and is best for those whom need an introduction to the concepts of dimensioning and tolerancing per. ISO 1101, Geometrical Tolerancing (G&T).

The program is divided up into nine separate training modules with quizes and one final test. Training modules are presented in a Power Point fomat with voice narration. Training pace is controlled by learner and all training modules may be repeated multiple times. The individual training modules will take between 10 and 25 minutes and include:

• Down-loadable Geometrical Characteristic Reference Chart

• Differences between ASME and ISO geometic characteristics and symbols.
• Glossary and Terms
• Introduction and ISO Rules
• Limit Tolerances
• Datums
• Datum Targets
• Tolerance Frame
• Form Tolerances
• Orientation Tolerances
• Location Tolerances
• Profile Tolerances
• Run-out Tolerances
• Final Knowledge Test (required for certificate of completion)

One must receive an 80% correct or greater on all training modules quiz’s, as well as the final knowledge test to receive the Certificate of Training (instant download).

The following are the technology requirements for this training course.

• Modern computer (PC with windows or MAC) not older than 8 years should do it.

Course Author Profile Kelly L Bramble