Share |

Re: analog switching intercom system

[ Follow Ups ] [ [ Home ][ Forum Archive ] [ Active Engineering Forum ] [ Design & Engineering Data ]

Posted by samcherian ( on January 26, 2003 at 06:54:46:

In Reply to: analog switching intercom system posted by waqar zaka on September 26, 2002 at 06:23:41:

: Dear Sir,
: I will try to make my self very breif about my problem. Well iam trying to develop an analog switching intercom system for 6 users which has following functions:-
: There will be a Main Operator Pannel with 6 Buttons and 6 LEDS, each button and LED represent a particular user. There will be another button the same operator pannel for calling a partcular user.
: Now there will be a single pair cable for each user and each user has normal telephone sets but without keypad.
: When ever any of the 6 users want to call the operator they will just simply pick up the handset and there will be a ring on the main operator pannel with LED indication showing from where the call is coming.
: Now the objective is to develop such a operator pannel with which normal telephone sets can be connected .
: Now i know that for this we need to make use of a two pole switch , a bell circuit using KA2410 , Power Supply of 60 Volts AC and 12 Volts DC, but i want to make sure if iam on the rite track....
: Kindly suggets me how i can make the 60 volts Ac and 12 Volts DC supply , the bell circuit ... and if you can sent me how to make the switch wiring for the main operator pannel i will be thankful to you.

Follow Ups:

Post a Followup

< "> Subject: Re: Re: analog switching intercom system


[ Follow Ups ] [ [ Home ][ Forum Archive ] [ Active Engineering Forum ]

© Copyright 2000 - 2018, by Engineers Edge, LLC All rights reserved.  Disclaimer