Share |

Re: Re: Pressure Vessel


[ Home ][ Forum Archive ] [ Active Engineering Forum ]

Posted By<" ">Jim Crowley on March 13, 2002 at 11:58:29:

In Reply to: Re: Pressure Vessel posted byCT Rogers on December 08, 2001 at 09:17:35:

There is a restriction for these formulas.
The criteria is listed in the Pressure code.
Circumferential - P does not exceed .385SE

Longitudinal - P does not exceed 1.25SE

Most cases no problem, but one should check regularly in order to avoid a problem.


Follow Ups



< "> Subject: Re: Re: Re: Pressure Vessel

Comments:

[ Home ][ Forum Archive ] [ Active Engineering Forum ]

© Copyright 2000 - 2018, by Engineers Edge, LLC All rights reserved.  Disclaimer