Share |

Re: Re: Draft


[ Home ][ Forum Archive ] [ Active Engineering Forum ]

Posted ByCragyon on April 11, 2002 at 07:42:04:

In Reply to: Re: Draft posted bypeterN on April 10, 2002 at 19:06:22:

As a side note, many plastic designers and the end manufacturer are moving away from detailing plastic parts. The 3D model is serving as the basis for how to build the part. Obviously, the draft is included in the 3D model. I agree with the previous post if you have to define the draft on a print.


Follow Ups



< "> Subject: Re: Re: Re: Draft

Comments:

[ Home ][ Forum Archive ] [ Active Engineering Forum ]

© Copyright 2000 - 2018, by Engineers Edge, LLC All rights reserved.  Disclaimer