Posted By<" ">Amado Andujo on June 29, 2002 at 15:26:11:
There are two C.R.S. parts that are plated prior to spot welding them. How is the spot welded area cured from corrosion?
There are two parts being attached by a countersunk poprivet, then bondo is used to cover the rivet, then painted with a waterbase paint. If the faceplace is bumped the bondo and paint crack thereby leaving the cracked impresion. How can the craching be eliminated?
< "> Subject: Re: Plating and Rivets
[ Home ][ Forum Archive ] [ Active Engineering Forum ]
© Copyright 2000 - 2018, by Engineers Edge, LLC All rights reserved. Disclaimer