Share |

Re: Re: Re: Galvanized Bolts


[ Home ][ Forum Archive ] [ Active Engineering Forum ]

Posted By<" ">Serdar Yorulmaz on August 25, 2002 at 23:51:08:

In Reply to: Re: Re: Galvanized Bolts posted byCory Long on August 14, 2002 at 17:21:11:

I am not sure whether electrical properties match between aluminum and zinc. If matches then there is no problem if it does not match then use a rubber sealing as it is used in rivet joints. so two metals wont contact with eachother and you will reduce the risk of corrosion..


: What about using zinc plated screws on aluminum? Is there a problem with increased corrosion because of a reaction between the different metals?

: : Hello
: : zink plated bolts are fine. I designed my own deck a while ago and used zink plated face to face connectors. I can guarantee you wont have any corrosion problem for about 15 to 20 years if it is really good plated or good qualified material. no need to spend more money go with zinc plated bolts.




Follow Ups



< "> Subject: Re: Re: Re: Re: Galvanized Bolts

Comments:

[ Home ][ Forum Archive ] [ Active Engineering Forum ]

© Copyright 2000 - 2018, by Engineers Edge, LLC All rights reserved.  Disclaimer