Membership Services

True Position MMC

[ Home ][ Forum Archive ] [ Active Engineering Forum ]

Posted By<" ">MaryAnn Clerici on August 26, 2002 at 14:33:35:

When measuring hole to hole position with a MMC callout, which hole diameter dimension do you use for the bonus tolerance if the holes are at different MMC?

Follow Ups

Re: True Position MMC 08:14:06 8/28/2002 (1)
- Re: Re: True Position MMC John-Paul Belanger 22:30:13 8/31/2002 (0)

Subject: Re: True Position MMC

Comments:: When measuring hole to hole position with a MMC callout, which hole diameter dimension do you use for the bonus tolerance if the holes are at different MMC?

[ Home ][ Forum Archive ] [ Active Engineering Forum ]