Share |

Re: docks

[ Home ][ Forum Archive ] [ Active Engineering Forum ]

Posted By<" ">Randy Kimball on September 13, 2002 at 20:19:02:

In Reply to: docks posted byTony Annacchino on September 12, 2002 at 18:29:24:

You have stepped into the ream of a PE. Since this dock
(these docks) will have people on them, you will either have
to design it yourself or pay a PE to design and certify
the design with his state PE number. No engineer can
safely advise you or recommend a design or material size,
unless he/she is a PE, without stepping into an ethics and
liable situation. ... sorry, but this is the way the laws are.
... PE = public engineer = state tested and reg. to do
public engineering.
Also .. please be advised, if you design it and it fails
or someone is ever injured (or even drowns) you are in
a very bad position with their lawer. .. BE V E R Y CAREFUL!!

Follow Ups

< "> Subject: Re: Re: docks


[ Home ][ Forum Archive ] [ Active Engineering Forum ]

© Copyright 2000 - 2018, by Engineers Edge, LLC All rights reserved.  Disclaimer