Share |

Re: Thickness tolerances for aluminum sheet stock


[ Home ][ Forum Archive ] [ Active Engineering Forum ]

Posted By<" ">Bill on October 04, 2002 at 14:47:12:

In Reply to: Thickness tolerances for aluminum sheet stock posted byJeff Moore on October 03, 2002 at 18:09:15:

: Does anyone know what the governing specification(s) are for finding the tolerances for aluminum sheet sheet stock. For example: 2024-T3 .032 thick sheet stock. Question: what is the thickness tolerance for .032 sheet stock and what specification dictates this? If you can help please let me know.
: Thank you,
: Jeff


Jeff: Get your hands on a Steel Manufactures Stock List & Reference Book. Ryerson or Earl M Jorgensen for example. They puplish their tolerances for everything they make. Ryerson for instance the .032 thick, 2024 Alum.; depending on the rolled width the tolerance is...
.0015 (40") .002 (60") and 003 (80") These are their standards other mfgr would/could have its own.

Hope this helps

Bill



Follow Ups



< "> Subject: Re: Re: Thickness tolerances for aluminum sheet stock

Comments:

[ Home ][ Forum Archive ] [ Active Engineering Forum ]

© Copyright 2000 - 2018, by Engineers Edge, LLC All rights reserved.  Disclaimer