Membership Services

Re: Re: Gearbox Design

[ Home ][ Forum Archive ] [ Active Engineering Forum ]

Posted By<" ">Serdar Yorulmaz on October 09, 2002 at 11:14:19:

In Reply to: Re: Gearbox Design posted byRandy Kimball on October 07, 2002 at 20:00:29:

Randy,
you are right the gear ratio is 9 but yes the stage amount is important. for example in a 2 stage reducer with a 9 gear ratio has moore torque in the gears than on the gears with a 3 stage reducer and same ratio.
If you see a mechanical design book you will understand what I mean.
by the way I have received the autoCad inventor thank you for advise in advance.
Serdar.

Follow Ups

Subject: Re: Re: Re: Gearbox Design

Comments:: Randy, : you are right the gear ratio is 9 but yes the stage amount is important. for example in a 2 stage reducer with a 9 gear ratio has moore torque in the gears than on the gears with a 3 stage reducer and same ratio. : If you see a mechanical design book you will understand what I mean. : by the way I have received the autoCad inventor thank you for advise in advance. : Serdar.

[ Home ][ Forum Archive ] [ Active Engineering Forum ]