Share |

Double Plus or Minus Tolerance


[ Home ][ Forum Archive ] [ Active Engineering Forum ]

Posted By<" ">David E. Wagher on October 28, 2002 at 11:56:02:

What if any rules apply to the Unilateral/Bilateral
Tolerances for dimensions with Double Plus or Minus
Tolerance?
Example: 0.250 -.010 to -.020





Subject: Re: Double Plus or Minus Tolerance

Comments:

[ Home ][ Forum Archive ] [ Active Engineering Forum ]

© Copyright 2000 - 2018, by Engineers Edge, LLC All rights reserved.  Disclaimer