Share |

Angularity vs Profile


[ Follow Ups ] [ [ Home ][ Forum Archive ] [ Active Engineering Forum ] [ Design & Engineering Data ]

Posted by Antonio Patino (4.22.37.4) on December 12, 2002 at 16:39:40:

I have a blue print with the following dim for the same surface (a surface at 30 degree inclination).

Profile / +.000 -.012 / A / B / C
Angularuty / .002 / A / B / C

My question is if the angularity is in violation of the profile by .001

or

if the surface can be from +.000 to -.012 as long as it is flat within .002 from a 30 degree imaginary boundary

Thanks in advance


Follow Ups:



Post a Followup

< "> Subject: Re: Angularity vs Profile

Comments:


[ Follow Ups ] [ [ Home ][ Forum Archive ] [ Active Engineering Forum ]

© Copyright 2000 - 2018, by Engineers Edge, LLC All rights reserved.  Disclaimer