Engineers Edge

[Home] [Design Resources] [Engineering Jobs] [Tell A Friend] [Technology Store]

Tool Usage
Post Reply   Forum
Posted by: Rahman

02/06/2003, 02:52:59

HiI am making micro grooves of 4.5microns depth on electroless NI plated dies of 100mm diameter and using a feedrate of 3microns/rev. But right now, I am facing a trouble to calculate the usage of tool (in kilometers). Please help me to solve this.

Post Reply | Recommend | Alert Rate   | Next |

Powered by Engineers Edge

© Copyright 2000 - 2019, by Engineers Edge, LLC All rights reserved.  Disclaimer