|
pre hardend metals / clutch plates | |||
Post Reply | Forum |
Posted by: bbuch ® 11/05/2008, 13:58:39 Author Profile eMail author Edit |
I have received a metal disk in the mail with no additional information as to the type of material with a request to create a drawing and samples. The material is 6 .00 in. OD with ID of 3.5 in. and .0505 in thick with gear teeth on the Id and is Rc 42 hardness. It presume it to be some type of clutch plate. Does anyone have any ideas of metals and process used to make clutch plates? Modified by bbuch at Wed, Nov 05, 2008, 16:34:04 |
Post Reply Tell a Friend (must be logged in) Alert Admin About Post |
Powered by Engineers Edge
© Copyright 2000 - 2024, by Engineers Edge, LLC All rights reserved. Disclaimer