Engineers Edge

[Home] [Design Resources] [Engineering Jobs] [Tell A Friend] [Technology Store]

ratchet wheel design
Post Reply   Forum
Posted by: lior shaphran

04/24/2003, 11:49:17

i'm designing a ratchet mechanism that should take a heavy load , and i cant find information regarding the excact design of the teeth on the ratchet wheel,and the pawl as well.(geometric properties) the load on one tooth is about - 3000 [N], the ratchet wheel dia' - 140[mm]. if someone can direct me to an information source ....

Post Reply | Recommend | Alert Rate  

Powered by Engineers Edge

© Copyright 2000 - 2019, by Engineers Edge, LLC All rights reserved.  Disclaimer