|
BRAKES | |||
Post Reply | Engineering Forum |
Posted by: sathyanarayanan ® 03/16/2009, 12:03:17 Author Profile eMail author Edit |
HI! I'M NEW INTO THE FORUM.
ANY ONE CAN TEMME HOW TO CONVERT A ABS VEHICLE TO NON ABS VEHICLE WITHOUT TOUCHING THE WIRING HARNESS OF THE VEHICLE |
Post Reply Tell a Friend (must be logged in) Alert Admin About Post |
View All | | Next | |
Replies to this message |
: BRAKES | |||
: BRAKES -- sathyanarayanan | Post Reply | Top of thread | Engineering Forum |
Posted by: randykimball ® 03/16/2009, 17:38:25 Author Profile eMail author Edit |
Your computer looks for a response from that system. The system is designed fail safe. I know how to do these things, BUT... "NO ONE" is going to be willing to accept the responsibility of providing you (and the world listening in) with that information, there is WAY too much at stake! The worst suggestion of your lifetime may be the catalyst to the grandest idea of the century, never let suggestions go unsaid nor fail to listen to them. Modified by randykimball at Mon, Mar 16, 2009, 17:39:22 |
Post Reply Tell a Friend (must be logged in) Alert Admin About Post |
Where am I? Original Top of thread | | | |
: : BRAKES | |||
: : BRAKES -- randykimball | Post Reply | Top of thread | Engineering Forum |
Posted by: sathyanarayanan ® 03/18/2009, 12:02:09 Author Profile eMail author Edit |
Thanks for the reply. Well the responsibility of converting it would be on my head if so i do get some good knowledge from the experienced people out here. If you are willing to share it. That wouldbe great.
Thanks again |
Post Reply Tell a Friend (must be logged in) Alert Admin About Post |
Where am I? Original Top of thread | | | |
: : : BRAKES | |||
: : : BRAKES -- sathyanarayanan | Post Reply | Top of thread | Engineering Forum |
Posted by: CCR5600Design ® 03/18/2009, 13:26:19 Author Profile eMail author Edit |
I know of several manufacturers who offer kits to install non-ABS brakes on cars for the purpose of off-highway competition such as drag racing and road racing. I would not recommend these brake kits for highway use. A simple search engine query for "AFTERMARKET BRAKE KITS" netted no fewer than 200 results. Check with these manufacturers for your application and intended use.
|
Post Reply Tell a Friend (must be logged in) Alert Admin About Post |
Where am I? Original Top of thread | | | |
: : : : BRAKES | |||
: : : : BRAKES -- CCR5600Design | Post Reply | Top of thread | Engineering Forum |
Posted by: sathyanarayanan ® 03/21/2009, 04:06:39 Author Profile eMail author Edit |
Thanks Ron,
But Me being a test engineer in brakes department, well still in the learning stage of ABS brakes, a task has been given to me to convert one of our vehicles to non abs, so well buying a kit wouldn stand a chance, as i would also want to learn it as well. Thanks again Ron. |
Post Reply Tell a Friend (must be logged in) Alert Admin About Post |
Where am I? Original Top of thread | | | |
© Copyright 2000 - 2024, by Engineers Edge, LLC All rights reserved. Disclaimer