Low temperature alloy steel tubing for hydraulic cylinders
Post Reply   Forum
Posted by: nicka ®

02/20/2004, 19:14:40
Author Profile eMail author Edit

I am looking for a seamless steel tubing specification to replace ASTM A106 gr. C in a very low temperature application for a hydraulic cylinder.

The minimum yield must be similar to A106C (around 40 KSI or higher) and it needs to meet the charpy v-notch test requirements per ASTM A370, 31 ft-lbs average at -50C.

The OD is in the range of 3-4" and the finished ID is 2.0-2.5". (Several applications with various ID/ODs) Hopefully I can find something that is not too exotic or hard to find in North America.

Any help anyone can offer would be greatly appreciated.







Post Reply | Recommend | Alert Administrator View All   | Next |

Replies to this message


Re: Low temperature alloy steel tubing for hydraulic cylinders
Re: Low temperature alloy steel tubing for hydraulic cylinders -- nicka Post Reply Top of thread Forum
Posted by: tpsth ®

04/16/2006, 21:59:55
Author Profile eMail author Edit

Please let us know what is your application to use these tubes ?







Post Reply | Recommend | Alert Administrator Where am I? Original Top of thread

Powered by Engineers Edge

© Copyright 2000 - 2024, by Engineers Edge, LLC All rights reserved.  Disclaimer